Monday - Friday 08:30 - 18:30

Bioclimatic Pergola

  • Aluminum profiles used in the system have 6063 – T6 F25 (7580 Brinell Hardness) properties.
  • All Profiles come electrostatically painted and packaged.
  • All accessories come packaged with galvanized and electrostatic oven paint.
  • Movable roof cover is made of Aluminum metal.
  • The panels first tilt at an angle of 110 degrees and the panels can be stopped at the desired angle.
  • The panels can be moved back and forth if desired after completing the 110-degree angle.
  • You can manage both your lights and your Bioclimatic Pergola product with the same remote control.
5-Year Engine Warranty
2-Year System Warranty
  • The aluminum profiles used in the system are 6063-T6 F25 (7580 Brinell Hardness).
  • All profiles are electrostatically oven-painted (Powder Coating) and packaged.
  • All accessories are packaged with galvanized and electrostatic oven paint (Powder Coating) for added protection. 
  • The movable roof cover is made of aluminum metal.
  • The panels operate axially and can be retracted when desired. This is a key feature for providing both ventilation and shading.
  • The panels can open at a minimum angle of 105 degrees axially, which is important for blocking the sun from the facade. 
  • The groove detail is aluminum and does not carry water out; the water is discharged from the carrier legs.
  • The opening and closing movement of the ceiling cover is provided by remote control.
  • The system is designed and produced to withstand all seasonal conditions. 
  • A timing belt provides power transmission between the engine and the moving mechanism and is adjustable.
  • Vertical carrier aluminum profiles are fixed to the floor by the steel screwing method.
  • Flange application screws are M12 *100 Rod M12 *80 Covered Steel dowel, both of which are galvanized to prevent damage to the floor insulation.
  • The wicks used in the system are EPDM wicks.
  • Silicones to be used are NP1 Brand Belgium imported polyurethane mastic silicone.
  • The system has 5 years of motor and 2 years of mechanical warranty. 
  • System modules have static features to meet 50kg+25kg/m2 distributed load and 50kg/m2 wind load.
  • The system modules are equipped with special panels that enable ventilation even in rainy weather.
  • The axial and rebound movements of the aluminum panels are driven by separate motors.

Kullanılan Motor Markaları

Kumaş Markası Aylar Tente
Kumaş Markası Aylar Tente
Kumaş Markası Aylar Tente
Kumaş Markası Aylar Tente

Kullanılan Toz Boya Markaları

Kumaş Markası Aylar Tente
Kumaş Markası Aylar Tente
  • The system is designed with special gaskets on the panels, preventing water absorption when closed. 
  • An extra motor enables backward movement. 
  • RGB light can be adapted into the system.
  • The control panel allows for the piston engine and light to be controlled with a single command.
  • High-strength poles measuring 130 mm x 150 mm x 2.5 mm are designed to withstand heavy loads.
  • The special corrugated design of the panels prevents water overflow and collection. 
  • The system is designed to cover large areas with minimal support poles. 
  • It can reach maximum dimensions of 7000mm front X 5500mm opening 4500mm front X 8000mm opening.
  • The system is suitable for suspension-type mounting in certain dimensions.
  • Insulated steel rope is preferred for sound insulation and corrosion prevention.
  • A specially developed timing belt with steel wire support and high tensile strength is used.
map-pin-point
Aylar Tente Logo